Operator`s manual
2-2 A-61371 April 2010
2 Lamp Illuminance — manually adjusts the Projection Lamp
illuminance. When the Projection Lamp is Off, it can be turned On
again by pressing any key.
3 Film Type — rotates between Auto, Nega, and Posi each time the
key is pressed.
• Auto: the scanner automatically determines between the film
type options of negative or positive for print production.
• Nega: select when using negative film. Dark and light values of
the print will be reversed.
• Posi: select when using positive film. Dark and light values of
the print will be consistent with the image on film.
4 Print Mode — allows you to fine-tune the image quality of the print
according to the original being used. Rotate between Text, Fine
and Photo with every press of this key.
• Text: for use with text images.
• Fine: for use with lower grades of film.
• Photo: for use with photo images.
5 Print Position — selects the portion of the image displayed on the
screen to be printed.
• Center : the image in the center of the screen is printed.
• Left : the image on the left half of the screen is printed.
• Page-by-Page : the The images on both the left and right
sides of the screen are printed consecutively on 8 1/2 x 11"
(A4) sheets of paper. This option is only available when 8-1/2 x
11" (A4) paper is selected.
6 Paper Selection — allows you to select either PC or PR mode.
• PC mode: selects the scanning size. When scanning the file
image except standard size, the Other lamp is lit.
• PR mode: selects the size of paper to be used for printing.
When the paper feeding tray is loaded with 8 1/2 x 11” (A4)
paper and the paper in the paper cassette contains 11 x 17”
(A3) paper, pressing this key rotates through the Auto, Paper
Feeding Tray, and Paper Cassette options.
Both the 8 1/2 x 11” (A4) and 11 x 17” (A3) indicators will
illuminate when Auto is selected.
7 Exposure display — indi
cates the current density level of the
printed image.
8 Exposure Mode indicator — Auto Exposure mode is indicated
when the green Auto light is on. The green Auto light turns off when
the scanner is in the Manual Exposure mode.
9 Exposure Mode — press to select between the Auto or Manual
Exposure modes.