Operator`s manual

2-4 A-61371 April 2010
Using the Shift
function on Control
Panel 1
When you use the Shift function (Clear/Stop key) on Control Panel 1,
other options are available.
Control Panel 1 - Shift Function
1 Job Recall — when pressed with the Shift key, the program
registration locations (1J, 2J and 3J) are called. Each time this key
is pressed while the Shift key is held down, the display rotates
through 1J, 2J and 3J.
2 Resolution —
sets the resolution of the scanner.
• When the scanner is connected to the printer, available
resolutions are: 400 dpi (4H) and 600 dpi (6H).
• When the scanner is connected to the PC through PowerFilm
Application Software, available resolutions are: 200, 300, 400,
600 and 800 dpi (2H, 3H, 4H, 6H and 8H respectively).
3 User Mode — when pressed with the Shift key, enters into User
Mode. See Appendix D, Setting System Default Values for more
information.
4 Electronic Zoom — sets zoom magnification.
• Zoom+: when pressed with the Shift key, the magnification is
increased by an increment of 0.0IX (up to 2.00X).
• Zoom clr: when pressed with the Shift key for 1 second, clears
the current zoom setting.
• Zoom-: when pressed with the Shift key, the magnification is
decreased by a decrement of 0.01X (down to 0.50X).
5 PC/PR — when pressed with the Shift key, the connection to the
PC or printer is selected.
6Shift — the Shift key must be pressed when you want to access
one of the functions described in this section.
Start10 1 C
Auto
Lighter Darker
Exposure
Paper Selection Print Position Print Mode
Text
Fine
Photo
Job Recall Resolusion Zoom- Zoom clr Zoom+ ShiftPC/PR
Film Type
Auto
Nega
Posi
12
A4
A3
A4
Paper Selection
11×17
1
2
/
8 ×11
Other
8 ×11
8 ×11
1
2
/
1
2
/
1
2
4 5 6
3