Operator`s manual

A-61371 April 2010 2-5
Control Panel 2
1 Centering/Fit key — when pressed, enables or disables the
Centering and Fit functions. When Auto Masking, Trimming or
Masking are set to Off, Auto Masking will automatically be enabled
when Centering is selected.
• Centering : centers all masked images onto the printed
page.
• Fit : enlarges the displayed image to fill the page when
printed. Enlargement is only to the full length or width of the
paper, whichever is achieved first.
.2 Masking — when pressed, cycles through Off, Trimming and
Masking if the system has the optional Manual Masking Kit.
•Off: no masking or trimming will be done.
• Masking : prints only the image outside of the area that is
defined on the screen.
• Trimming : prints only the area of the image that is
defined on the screen.
- If Trimming is selected from the Off state, the previously
entered settings for Centering/Fit and Manual Masking are
applied.
- From Trimming, when Masking is selected, the Centering/Fit
setting is disabled and the previous settings for the Masking
area are applied.
- The Manual Masking area will be cancelled whenever Off is
selected from the Masking state.
- Trimming or Masking are not available through the Auto
Masking function.
Centering Fit Masking Auto
Masking
Auto Skew
Correction
Focus AF
1 5 62 3 4