Operator`s manual

A-61371 April 2010 3-1
3 Using the Scanner
This chapter provides procedures on how to us the Kodak 3000 DV
Plus Digital Scanner.
Following is an outline of the basic printing procedure. Detailed
procedures on these steps follow in this chapter.
1. Load the film. The procedure for loading film is determined by the
type of Film Carrier (optional) that is being used. Review the
Operator’s Manual that came with your Film Carrier for more
information.
2. Select and replace the lens.
3. Position the image to be scanned or printed on the screen.
4. If desired select zoom, focus or rotation options.
5. Select film type and paper size. If both 8 1/2 x 11” (A4) and 11 x17”
(A3) are loaded, the system can select the correct size
automatically.
6. Select the print position.
7. Select the image density.
8. Enter the number of prints to be made.
9. If necessary, adjust the image processing features.
10.Press Start to scan and/or print the displayed image. The scanning
and/or printing of the image is initiated after the Start key is pressed.