Operator`s manual

3-6 A-61371 April 2010
Selecting the film
type
Auto
The system will automatically determine the polarity of the film being
used when Auto is selected.
NOTE: The system cannot determine the polarity of certain types of
film. If the system cannot detect a film type, select it manually.
The system does not detect exterior conditions such as when
the glass surface of the carrier is dirty or scratched.
Nega (Negative film)
If negative film is being used, press the Film Type key to select Nega.
Posi (Positive film)
If positive film is being used, press the Film Type key to select Posi.