Operator`s manual

A-61371 April 2010 3-7
Selecting the paper
size
Press the Paper Selection key to select the desired print size. The
system cycles through the available sizes each time you press the key.
NOTE: If the printer is not loaded with a desired size paper, load the
paper into the printer.
Using the Auto Paper
Selection function
When the paper feeding tray is loaded with 8 1/2 x 11” (A4) paper and
the paper cassette is loaded with 11 x 17” (A3) paper, this function can
be used to automatically select the appropriate size of paper for the
current job.
• Press the Paper Selection key so both the 11 x 17” (A3) and the
8 1/2 x 11” (A4) LEDs light up.
The system automatically detects the image area and prints on
8 1/2 x 11” (A4) paper for half-size film and on 11 x 17” (A3) paper for
full-size film.
NOTES:
• The Auto Paper Selection function can only be used for a
combination of 11 x 17” (A3) and 8 1/2 x 11” (A4) paper sizes. The
Page-by-Page function cannot be selected when the Auto Paper
Selection capability is being used.
• When a 7.5x or 7.7x lens is being used, the Auto Paper Selection
function cannot use 11 x 17” (A3) size paper because of the size of
the image area.
• When Masking or Trimming has been selected, the system selects
8 1/2 x 11” (A4) if the defined area is less than 8 1/2 x 11” (A4) size
and 11 x 17” (A3) for all other print jobs.
Half Full
Film Image
Print Image
8 1/2" x 11" (A4) 11" x 17" (A3)