Operator`s manual
A-61371 April 2010 3-11
Adjusting Image
Processing features
Using Auto Masking The Auto Masking function prevents the frame (non-image area) of a
film image from appearing on the print.
• Press the Auto Masking key to turn on this function.
NOTES:
• The image area of the screen must provide at least 45 mm
horizontally and vertically.
• The width of the frame to be masked must be at least 10 mm.
• If the film image on the screen does not meet the above
requirements, the Auto Masking function will not work properly. Auto
Masking is a frame erasing feature, it cannot remove an image from
in between two separate frames.
Correction
B
B
B
B
A
A
AB AC