Operator`s manual

A-61371 April 2010 3-13
Selecting Trimming
• Press the Masking key to select Trimming. The lights on the panel
light up according to the currently selected paper size and print
position.
NOTE: You can print the area specified by the green lights. The lights
which do not match with the selected paper size and the print
position may light up just after the Job Program is called.
Defining an area
Define the end points for both the vertical and horizontal areas of the
image on the screen using the green lights on the area indication
panels.
NOTE: The points defining the vertical and horizontal area can be
selected in any order. Blinking lights on the indication panels
indicate an improper entry of the specified area.
A4 vertical,
Center
ON
ON
Example: A4 vertical, Center
3
4
1
2