Operator`s manual

A-61371 April 2010 iii
REACH statement
Please consult www.kodak.com/go/REACH for information about the presence of substances included on the candidate list
according to article 59(1) or Regulation (EC) No. 1907/2006 (REACH).
Battery Information
This product contains a Lithium Ion button cell battery. This battery can only be removed or replaced by a qualified Service
Engineer.
Safety Information (34PPM Video Laser Printer)
Laser Safety: This printer is a page printer which operates by means of a laser. There is no possibility of danger from the laser,
provided the printer is operated according to the instructions provided in this manual.
Since radiation emitted by the laser is completely confined within protective housing and external covers, the laser beam cannot
escape from the machine during any phase of user operation.
This printer is certified as a Class 1 laser product: This means that the printer does not produce hazardous laser radiation.
Internal Laser Radiation: This product employs a Class IIIb Laser Diode that has an invisible laser beam. The Laser Diode and
Scanning Polygon Mirror are incorporated in the print head unit.
Maximum average radiation power: 37 µW at laser Aperture of mirror unit.
Wave length: 770-800 nm
The print head (in the interior of the printer in front of the toner cartridge) consists of the print head unit and the mirror unit. The
laser beam is emitted from the print head unit, passes through the mirror unit, then is radiated through the laser aperture of the
mirror unit to the interior of the printer.
WARNING: The print head unit is NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be opened under any
circumstances
For United States
CDRH Regulations: This printer is certified as a Class I laser product under the Regulation Performance Standard according to
the Food, Drug, and Cosmetic Act of 1990.
Compliance is mandatory for laser products marketed in the United States, and is reported to the Center for Devices and
Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA) of the Department of Health and Human Services
(DHHS). This means that the product does not produce hazardous laser radiation.
The label shown below indicated compliance with the CDRH regulations and must be attached to laser products marketed in the
United States.
CAUTION: Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 15mW, and the wavelength is 770-800 nm.
WARNING: This symbol warns against a potential for burns.
The inside of the printer has areas subject to high temperature, which may
cause burns. When checking the inside of the unit for malfunctions such as a
paper misfeed, do not touch the locations (around the fusing unit, etc.) which
are indicated by a “CAUTION HOT” label.
Laser
Aperture
Print
Head
Unit
Mirror Unit