Operator`s manual

3-16 A-61371 April 2010

Centering

• Press the Centering/Fit key to turn on Centering.

NOTE: Centering/Fit mode cannot be used if Masking is selected.

Fit

• Press the Centering/Fit key to turn on Fit.

NOTE: Fit mode cannot be used when the scanner is connected to the

PC.

Using the Cycle Print

mode

This function automatically scans the next image following a preset

period of time. Images are manually loaded on the carrier glass in

between cycles.

Cycle Print mode is a system setting that must be entered by an Kodak

Service Representative.

This function is only available in the PR mode.

Centering/Fit