Operator`s manual

A-61371 April 2010 4-11
Replacing the
exhaust filter
Replace the exhaust filter on the back of the printer when you replace
the toner cartridge.
1. Remove the used exhaust filter and dispose of it according to your
local regulations.
2. Remove the new filter from its box and insert it into place.
Troubleshooting
Misfeed clearing
procedure
Locate the misfeed using the code and perform the misfeed clearing
procedure.
CAUTION: The fusing unit inside the printer becomes very hot
during operation. To avoid a burn, be very careful not
to touch it.
Display Code Description
P0 The wrong size paper has been loaded in the paper
feeding tray.
• Load the set size paper in the set direction. This
code also appears when two or more sheets of
paper are taken up at the same time.
P1 There is a misfeed near the paper take-up section or
more than one sheet of paper is taken up at the
same time.
P2 There is a misfeed near the toner cartridge.
P3 There is a misfeed near the fusing unit.