Operator`s manual

4-12 A-61371 April 2010
Clearing a misfeed from
the paper feeding tray
1. Remove all paper from the paper feeding tray.
2. Pull out the misfed paper.
3. Correctly load the paper into the paper feeding tray.
4. If necessary, open and close the top cover to cancel the misfeed
code.
Clearing a misfeed from
the paper cassette
1. Pull out the paper cassette until it stops.
2. While pressing the release buttons (one on each side) remove the
cassette.
3. Pull out the misfed paper. Make sure no paper remains under the
roller in the cassette.
4. If the misfeed paper cannot easily be pulled out, lift the green lever
on the inner-right side to release the paper feed roller, and then pull
out the paper. After removing the misfed paper, be sure to return the
green lever to its original position. Do not use force to remove
jammed paper.
5. Before reinstalling the cassette, check that the paper remaining in
the cassette is loaded correctly. Make sure no paper remains
misfeed under the roller in the cassette.
6. Reinstall the cassette.
Clearing a misfeed from
inside the printer
1. Open the top cover.
CAUTION: Never touch the copper or brass electrodes or
electrical parts that are located inside the top cover
and underneath the toner cartridge, as a printer
malfunction can result.
Do not to touch around the image transfer roller
(may result in reduced print quality) or around the
fusing unit (may result in burns).
2. Remove the toner cartridge and store it in a light-free protective bag.
3. If the paper is stopped by the fuser, lift the green levers on each side
and slowly pull out the paper from the roller.
NOTE: Do not pull out the paper from above the rollers; otherwise
decreased print quality may result.