Operator`s manual

A-61371 April 2010 D-1
Appendix D Setting System Default Values
Changing settings
with the User mode
User mode allows the default values of various functions to be set or
changed as necessary. Most of these functions are set-up and changed
by your Kodak representative, however some User modes can be
changed by you.
Setting these default values according to your needs saves time and
allows you to work more efficiency. The following modes can be set:
Display Function Description
U1 Special Print mode Not available.
U2 Engineering Enhancement
mode
Corrects slight image distortion occurring
in the scan direction.
U3 Auto Power Save Used to set the time it takes the unit to be
automatically set into the Auto Power
Save mode.
U4 Paper Feeding Tray Size Used to set the size and direction of the
paper loaded in the paper feeding tray.
U5 Imprint Position Setting Used to turn ON or OFF the Date Print
and Character Overlay functions and to
set the Date Print position.
U6 Year, Month, Date Set mode Used to set the print pattern for the Date
Print function.
U7 Imprint mode set Used to correct the time of day for the
Date Print function.
U8 Total Scan Counter Used to display the number of scan
sequences carried out by the scanner.