Operator`s manual
D-2 A-61371 April 2010
Entering and exiting the
User mode
1. Hold down the Shift key and Paper Selection key at the same time
for 0.5 seconds. The Multi-Print Display displays a “U”.
2. Press the Exposure Adjustment key (Darker or Lighter) to select
the specific function.
• Pressing the Darker key scrolls through the functions in the
following order: U, U1, U2, U3, etc.
• Pressing the Lighter key scrolls through the functions in the
following order: U8, U7, U6, U5, etc.
3. Press the Exposure Mode key to display d(*). The asterisk
indicates the current setting value.
4. Press the Exposure Adjustment key (Darker or Lighter) to select
the specific setting value.
• Pressing the Darker key scrolls through the setting values in
the following order: d0, d1, d2, etc.
• Pressing the Lighter key scrolls through the setting values in
the following order: d5, d4, d3, etc.
5. Press the Start key to validate the setting value.
6. Press the Clear key to exit User mode.
NOTES:
• If the Exposure Mode key is pressed, the setting value is not
validated and the User mode initial screen (U) appears.
• If a new function is to be set, start the procedure over beginning with
Step 2.
Paper Selection
11×17
1
2
/
8 ×11
8 ×11
1
2
/
User Mode
C
Shift
Auto