Operator`s manual

1-2 A-61371 April 2010
Installation Placement of the unit in the environment described below will ensure
optimal performance throughout the long life of service for which it was
designed.
• A well-ventilated place.
• An area which is free from ammonia or other organic gases.
• A place which has easy access to a power wall socket-outlet so that
the unit may be easily plugged in and unplugged.
• Any area free from direct sunlight.
• A place which is out of the direct air stream of an air conditioner,
heater or ventilator and is not subject to extremely high or low
temperatures or humidity.
• A stable location with a flat surface that is not subject to undue
vibration.
• A place that is free from any object that would block the heat exhaust
duct of the printer.
• A place away from curtains or anything else that is easily flammable.
• An area that is safe from spilled water or other liquids.
• A dust-free location.
NOTE: If the scanner is located near a window, do not face the screen
towards the window.
Power source • Use a power source with minimal voltage fluctuation.
Power Source: 50Hz-60Hz
Voltage fluctuation: within ± 10%
Frequently fluctuation: within ± 3%
NOTE: For detailed specifications, see Appendix A.
• Do not exceed the capacity of the outlet, especially when sourcing
other appliances from the same outlet.
• The outlet should be located near the unit and be easily accessible
so the power cord can be unplugged immediately if necessary.
• NEVER connect any other appliances or machines by means of a
multiple socket to the outlet being used for the unit.
• Make sure that the power cord and extension cord do not become
caught in any mechanism of the system. Do not allow either the
power or extension cord to become caught underneath the weight of
the unit.