User manual Dishwasher DX 103
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Select and start a washing program _ _ _ _ _ _ _ _ 2 3 4 4 5 5 7 7 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 What to do if…
• A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged, – if the control panel, worktop or plinth area are damaged so that you can get access to the inner side of the appliance. Contact your local Customer Care Centre.
Washing programmes Program Degree of soil Type of load Program description Pots Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Regular Plus Normal soil Crockery and cutlery Prewash Main wash up to 65°C 2 intermediate rinses Final rinse Drying Quick 30 1) Normal or light soil Crockery and cutlery (Partial load) Main wash up to 65°C Final rinse Regular Eco 2) Normal soil Crockery and cutlery Prewash Main wash up to 50°C 1 in
3. Set the correct washing program for the type of load and soil. 4. Fill the detergent dispenser with the correct quantity of detergent. 5. Start the washing program. Use of rinse aid Caution! Only use rinse aid specified for dishwashers. Fill when the rinse aid indicator (B) becomes clear. Follow these steps to fill the rinse aid dispenser: 5 1 2 Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent).
– Make sure that glasses do not touch other glasses. – Put small objects in the cutlery basket. • Plastic items and pans with non-stick coatings can retain water droplets. Plastic items do not dry as well as porcelain and steel items. • Put light items in the upper basket. Make sure that the items do not move. Caution! Make sure that the spray arms can move freely before you start a washing program. 1 Arrange the items to let water touch all surfaces.
Caution! If the basket is in the upper position, do not put cups on the cup racks. Use of detergent Only use detergents (powder, liquid or tablet) that are suitable for dishwashers. Follow the data on the packaging: • dosage recommended by the manufacturer, • storage recommendations. Do not use more than the correct quantity of detergent to decrease pollution. 5 6 Different brands of detergent dissolve in different times.
When the washing program operates, you cannot change the program. Cancel the washing program. 2. Close the appliance door. The washing program continues from the point of interruption. Warning! Only interrupt or cancel a washing program if necessary. Open the door carefully. Hot steam and water can escape. • • 1. 2. 3. Cancelling a washing program • Press and hold the start/cancel button until the start/cancel indicator light goes off. The washing program is cancelled.
Long periods of non-operation 5 Put the filter A in the bottom of the appliance. Install the flat filter correctly under the two guides D. 6 Put the filter system in position. To lock the filter system, turn the handle clockwise until it locks in position Important! Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail stick. External cleaning Clean the external surfaces of the appliance and control panel with a damp soft cloth.
Fault code and malfunction Possible cause and solution • continuous flash of the start/cancel indicator light • 1 flash of the 'Finished' indicator light The appliance does not fill with water • The water tap is blocked or furred with limescale. Clean the water tap. • The water tap is closed. Open the water tap. • The filter in the water inlet hose is blocked. Clean the filter. • The connection of the water inlet hose is not correct. The hose can be kinked or squashed.
The cleaning results are not satisfactory There are streaks, milky spots or a bluish coating on glasses and dishes • Decrease the rinse aid dosage. Dry water drop stains on glasses and dishes • Increase rinse aid dosage. • The detergent can be the cause. Technical data Dimensions Width (mm) 596 Height (mm) 850 Depth (mm) 610 Electrical connection - Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.
Make sure that the dimensions of the recess agree with the given dimensions. correct, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the appliance is level. Adhesive steam protection foil If the worktop is removed, fit the steam protection onto the front part of the kitchen cabinet benchtop. 1 2 The steam protection foil is not supplied with freestanding models, but can be purchased from Electrolux Spare Parts.
The drain hose must be free of kinks and obstructions. Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane. If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot. The appliance has a security feature to prevent dirty water going back into the appliance.
2. 3. 4. 5. 6.
upon Electrolux which cannot be excluded, restricted or modified.
www.electrolux.