EN FRONT LOAD DRYER USE & CARE GUIDE FR SÉCHEUSE Á CHARGEMENT FRONTAL GUIDE D’UTILISATION ET D’ENTRETIEN ES SECADORA DE CARGA FRONTAL GUÍA DE USO Y CUIDADO A11199701 January 2018
Finding Information Please read and save this guide Thank you for choosing Electrolux, our premium brand in home appliances. This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information. Table of Contents Finding Information................................
Safety Important Safety Instructions WARNING FIRE OR EXPLOSION HAZARD Failure to follow safety warning exactly could result in serious injury, death, or property damage. DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS: • DO NOT try to light any appliance. • DO NOT touch any electrical switch; DO NOT use any phone in your building. • Clear the room, building or area of all occupants.
Safety Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Safety • DO NOT use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product. WARNING DO NOT continue to use the dryer if you hear squeaking, grinding, rubbing or other unusual noises. This could be a sign of mechanical breakdown and lead to fire or serious injury. Contact a qualified technician immediately. • Failure to comply with these warnings could result in fire, explosion, serious bodily injury and/or damage to the dryer.
Safety WARNING FIRE/ELECTRICAL SHOCK HAZARD Avoid fire hazard or electrical shock. DO NOT use an adaptor plug or extension cord or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire, or death. 240 v Electric Dryer 10-30R 3-wire (fused 30 amp) 14-30R 4-wire (fused 30 amp) UL-approved service cord must be installed on electric dryers (not provided with unit except those manufactured for sale in Canada).
Features LED Display Drum Light (on select models) Cycle Selector Control Lock Serial & Model 3 Drum Vanes Wide-Angle Door Hinge Reversible Door Front-Mounted Moisture Sensor (on select models) Door Latch Exhaust Channel Outlet Door Striker Adjustable Leveling Legs Optional Heavy Duty Collapsible Drying Rack* LuxCareTM Lint Shield Optional Stacking Kit for Mounting on Matching Washer* *Not included with initial purchase. May be purchased as accessory.
Features Model Series 300 SERIES 1 2 3 4 5 6 7 8 9 400 SERIES 1 2 3 4 5 6 7 8 9 10 500 SERIES 1 2 4 3 5 6 8 7 9 10 600 SERIES 1 1 power 4 temperature 7 options/select (set) 2 3 2 cycle LED display 5 dryness (dry level) 8 cancel 4 5 6 7 8 9 10 3 cycle selector 6 time dry (dry time) 9 start/pause This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles shown above for reference only.
Operating Instructions Operating Your Dryer WARNING To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in this Use & Care Guide before operating your dryer. WARNING WARNING DO NOT operate dryer without lint filter in place. STEPS 1. Prepare load for drying. Clean the lint filter after every load. TIPS IMPORTANT • Dry items of similar fabric, weight and construction in the same load. • Separate dark items from light-colored items.
Operating Instructions Operating Procedures (continued) STEPS TIPS 4. Select the • See Cycle Selection and Cycle Settings for appropriate detailed descriptions of cycle controls. cycle and • See Cycle Setting Charts to determine which settings for settings are available for each cycle. each load. • To provide the best care, not every setting or option is available with every cycle. If a setting or option is not available for the cycle selected, the indicator will not light.
Controls and Settings 11 Setting Chart - 300 Series Dryer heavy duty towels normal high normal air dry delicates dry time These temperature, dryness levels and options are available with the following cycles: CYCLE SELECTIONS CYCLE SETTINGS temperature (temp) dry level (dryness) high normal damp dry time (dry time) auto CYCLE OPTIONS 60 min 30 min options wrinkle release eco control lock
Controls and Settings Setting Chart - 400 Series Dryer These temperature, dryness levels and options are available with the following cycles: CYCLE OPTIONS = Available selections.
Controls and Settings 13 Setting Chart - 500 Series Dryer These temperature, dryness levels and options are available with the following cycles: CYCLE OPTIONS = Available selections.
Controls and Settings Setting Chart - 600 Series Dryer CYCLE OPTIONS = Available selections.
Controls and Settings 15 Cycle Selection SELECTING THE RIGHT CYCLE TO SAVE ENERGY This dryer has been specifically designed with options to help you save energy and at the same time utilize the optimal drying setting for your clothing. The normal cycle was used to rate the dryer for energy efficiency. The normal cycle defaults to normal temperature setting, normal dryness level and eco mode option (if available) on. Some cycles save more energy than others.
Controls and Settings times and temperature settings can be selected when using this cycle. The fast dry cycles (on select models) have preset times of 15, 18 or 20 minutes (dependent on model) with a preset temperature of high only. Dryness levels will not be an available option when using either of the timed drying cycles. WARNING FIRE HAZARD To avoid fire hazard, DO NOT use heat to dry items containing feathers or down, foam rubber, plastics similarly textured, rubber-like materials.
Controls and Settings 17 Dryness Level (dryness) To set or change the dryness level, press the dryness button to scroll to the desired setting. The dryness levels include max (on select models), high, normal, less (on select models), and damp. Most Auto Dry cycles default to the normal dryness level. Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select high or max (on select models).
Controls and Settings during off-peak energy hours. The start of any cycle can be delayed for 30 minutes to 12 hours. After selecting the delay time option, use the cycle selector to scroll to the desired delay time and press start. The delay time icon will illuminate on the LED display to indicate the delay time option is activated, The delay time will begin counting down on the LED display once activated.
Controls and Settings 19 NOTE For step-by-step instructions cleaning the lint filter, refer to Cleaning the Filter in the Care & Cleaning section of this Use and Care Guide. Optional Drying Rack (not included) Use the drying rack for items which should not be tumble dried. Extend the collapsed drying rack and insert the rack into the dryer drum. Place the front legs into the front air grill and lower the rear of the rack onto the back of the dryer drum.
Care & Cleaning WARNING To reduce risk of fire or serious injury to persons or property, comply with the basic warnings listed in the Important Safety Instructions and those listed below. Cleaning the Filter WARNING Clean the lint filter after every load. CLEAN LINT will be displayed at the end of the cycle to remind you to remove lint from the filter. Clean the lint filter after every load. Lint build-up on the filter restricts air flow, which causes longer drying times.
Care & Cleaning 21 • When cleaning chrome parts, it is best to use only a damp cloth. • Before moving the dryer, place a strip of cardboard or thin fiberboard under the front leveling legs to prevent damage to the floor. WARNING FIRE HAZARD A clothes dryer produces combustible lint. The dryer must be connected to an outdoor exhaust. Regularly inspect the outdoor exhaust opening and remove any accumulation of lint around the opening and in the surrounding area.
Solutions to Common Inquiries Normal Operating Sounds You may or may not hear the following sounds from your new dryer: A. WATER VALVE (Steam models only.) The flow of water is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to control the water flow. B. SUSPENSION ROLLERS The dryer drum is supported by a set of suspension rollers. At times there may be a thumping or rolling sound when the dryer starts.
Solutions to Common Inquiries 23 Common Drying Inquiries Many drying problems involve poor cleaning results, poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory drying results, follow these suggestions provided by The Soap and Detergent Association. PROBLEM POSSIBLE CAUSES SOLUTIONS Greasy, oily stains • Fabric softener sheet • Rub fabric softener • Add a few bath towels stains with bar soap. to small loads for proper Rinse and rewash. tumbling.
Solutions to Common Inquiries Service Prevention Checklist Before calling for service, review this list. It may save both time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this dryer. PROBLEM POSSIBLE CAUSES SOLUTIONS Dryer does not start. • Make sure the plug fits tightly in wall outlet. • Electrical power cord is not securely plugged in or plug may be loose. • House fuse blown or circuit breaker tripped.
Solutions to Common Inquiries 25 PROBLEM POSSIBLE CAUSES SOLUTIONS Drying cycle takes too long, outside of the dryer feels too hot or smells hot. • Make sure all lint has been removed from the dryer lint filter before starting each cycle. • Exhaust duct must be at least 4 inches in diameter and made of rigid or semi-rigid metal. • When in place, the duct must not exceed length listed in the Installation Instructions. • Drying time will be 20% longer than drying on a 240 volt circuit.
Warranty Information For the applicable warranty period as set forth below, as measured from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Warranty Periods: • All parts — One year including labor. In addition, your appliance is covered by a one year, parts only, limited warranty.
Notes 27
electrolux.
