Installation Guide

8
Unpacking Washer
Removing shipping hardware
Installing hole plugs
5 SPACERS
5 SPACERS
5 P CLAMPS
5 P CLAMPS
7 HOLE PLUGS
(IN BAG)
1 SHIPPING FORK
1 SHIPPING FORK
Remove all of the following:
Locate 7 hole plugs in the small bag supplied
with washer instruction guides. Insert them in
the holes in washer back panel.
UNIVERSAL
WRENCH
(IF INCLUDED)
5 BOLTS
5 BOLTS
NOTE
Rubber expansion material on spacers may
need time to relax before they can be easily
pulled through shipping hole.
IMPORTANT
Failure to remove shipping hardware completely could result in damage to the appliance, damage
to your home, or unexpected washing results.
Save all shipping bolts and spacers for future use. If the washer is to be transported at a later date,
the shipping hardware must be reinstalled to help prevent shipping damage.