Manual

Vacuuming
,_For your safety, turn power switch to 'off' before
attaching accessories. Press switch to 'hard floor'
setting when using accessories.
To use accessories: With Quick Release handle in upright
position, rotate handle release latch forward, then lift
handle and pull away from vacuum cleaner body (Fig. 1).
[] Extend or shorten the telescopic wand by pressing
release button ® (Fig. 2).
[] Use crevice tool or turbo nozzle with or without wand.
Press button _ to pull wand off handle (Fig. 2).
Dusting brush
Use for baseboards, furniture, vents and blinds (Fig. 4).
[] To use, press dusting brush button ® and slide brush
to end of wand until it clicks (Fig. 3).
[] After using, slide brush back until it clicks.
Crevice tool
Use for grooves, narrow openings, tight spaces (Fig. 5).
[] To use, push tool onto handle or wand until snug.
[] Store crevice tool on back of vacuum.
accessories
Fig 1
i
iFig3
p ,!!i?'_.......
_ig 4
Turbo nozzle
Use for stairs and upholstered furniture (Fig. 6).
[] To use, push nozzle onto handle or wand until snug.
[] Store turbo nozzle on front of vacuum.
[] Position vacuum cleaner on floor at bottom of stairs,
pushed against bottom step (Fig. 7).
_. For your safety, do not place vacuum at top of stairs
or on steps.
After using accessories
[] Press button ® to shorten wand. Press button ® and
slide dusting brush back into storage position (Fig. 2).
[] If wand is off, push back onto handle until it clicks.
[] Place wand into opening on back of vacuum (Fig. 8A).
[] Align ribs on wand into grooves at top of vacuum
(Fig 8B). Push down handle until it locks into position.
Fig 7
Fig8A ,
Electrolux Customer Service 1o800o896o9756