Manual

z Maintenance schedule
Turn power switch to off (0) position and unplug power cord before cleaning filters.
Do not operate vacuum cleaner without filters in place, as this could cause severe damage to vacuum.
Press down carrying handle Hold over waste basket. Bottom lid will release;
and pull out dust cup. Pull up orange leverto release lid. both chambers will empty.
/
Close bottom lid until it snaps.
Put dust cup back in place.
/
Filterscreen is insidedust
cup. Pull gray lever to release.
If needed, wash screen with
soap and water. Dry thoroughly.
Replace screen. Turn clockwise
to fit tabs into grooves and lock.
Filterscreen must be in place
to reinstalldust cup.
..... Filter cover
Filter frame
Foam filter
Pull up tab to releasefilter cover. Wash foam filter and frame. Air dry;
reposition in cover. Pressfirmly at top to snap frame back in place. Filter
cover will not close if foam filter and frame are not in installed correctly.
i...................................... \
....... ................
} ,/
Removedust cup and set aside. Grasp tab and pull out filter.
Pullfilter cover up and out. Replace with new filter.