User manual

electrolux 21
3 Between 22:00 and 6:00 the display re-
duces its brightness when the appliance
is switched off to save energy.
Operation of the Basic Settings
Example
1. Using or select the menu option
Basic Settings.
2. Confirm with .
3. Using or go to the setting that you
want to adjust.
4. Confirm with .
The value currently set appears in the
display.
5. Using or select the desired value.
6. Confirm with .
The setting is changed.
Everyday use of Basic Settings
Set+Go
The function Set+Go means you can set all
settings for an oven function and then start it
later.
Example application:
You prepare a dish in the morning and enter
all necessary settings in the oven.
Your child comes home at lunchtime, puts
the dish in the oven, presses any key and the
oven starts with your settings.
Condition:
• Fixed switch-Duration
To sw it ch o n Se t+ Go
1. Select oven function with desired set-
tings.
2. Press key repeatedly until the
”Set+Go” window appears.
3. Confirm with .
The function Set+Go is now switched
on.
To start Set+Go
1. Press any key (except ).
Selected oven function starts.
As soon as the oven function is com-
pleted, a signal sounds.
2. Press any key to switch off the signal.
3 While the selected oven function with is
operating Set+Go, the Key Lock is ac-
tive (see section Key Lock).
3 Set+Go can be activated or deactivated
in the Basic Settings menu.
Heat+Hold
The function Heat+Hold keeps your pre-
pared dish warm for 30 minutes, after the
baking or roasting has ended.
This is helpful, for example, when your
guests are late.
Condition for Heat+Hold:
• Fixed temperatur is above 80°C
• Fixed switch-Duration
Alarm/Error Tones – On
– Off
Warning beeps sound when steps which cannot be car-
ried out are selected. Switch warning beeps on or off.
Service ECAIA207
V03IA003
24
Indicates the version of the software and the period of op-
eration.
Factory Settings Reset all settings to the factory settings (My Programmes
too).
Setting Display Description