User manual

electrolux 23
Duration or End Time
Duration
For setting how long the oven is to operate.
End Time
For setting when the oven is to switch itself
off again.
1. Select oven function.
2. Press key repeatedly until the ”Du-
ration/End Time” window appears.
3. Using or key, set the desired cook-
ing time or switch-off time
(max. 23 hours 59 minutes).
4. Confirm with or wait 5 seconds.
The settings of the selected oven func-
tion are displayed with the cooking time
or switch-off time set.
When the time has elapsed, an acoustic sig-
nal sounds for 2 minutes and a message is
displayed.
The oven switches itself off.
5. Press any key to stop the signal (except
).
3 Irrespective of the oven function set the
fixed cook time remains. You can move
between the oven functions.
Condition: The oven function to which
you move has no fixed cook time.
3 If the Meatprobe is inserted, Duration
or End Time is not possible.
2 Using residual heat with the
Duration and End Time clock
functions
When the Duration and End Time
clock functions are used, the oven
switches the heating elements off, when
90% of the time set or calculated has
elapsed. The residual heat present is
used to continue the cooking process
until the time set has elapsed
(3 to 20 mins.).
Duration and End Time combined
3 Duration and End Time can be
used simultaneously, if the oven is to be
switched on and off automatically at a
later time.
1. Select oven function.
2. Press key repeatedly until the ”Du-
ration/End Time” window appears.
3. Using the Duration function, set the
time required for cooking the dish,
e.g.: 1 hour.
4. Confirm with .
5. Using the End Time function, set the
time at which the dish is to be ready,
e.g.: 14:05.
6. Confirm with or wait 5 seconds.
7. The selected oven function is displayed
with the cooking time and switch-off
time set for a few seconds..
A message is displayed when the pro-
gramme starts.
Key Lock
The key lock protects all functions set from
accidental changes.
To sw it ch o n Ke y Lo ck
1. Select oven function.
2. Press key repeatedly until the ”Key
Lock” window appears.
3. Confirm with .
The Key Lock is now activated.