Operating instructions

Cleaning the hose and nozzle

The vacuum cleaner stops automatically if the nozzle, tube,

hose or lters and s-bag

becomes blocked. In such cases,

disconnect from mains and allow to cool for 20-30 minutes.

Clear blockage and/or replace lters and s-bag® and restart.

Tubes and hoses

35 Use a cleaning strip or similar to clear the tubes and hose.

(2) Hose handle could be dismantled from hose if cleaning

is needed.

36 It may also be possible to remove the obstruction in the

hose by squeezing it. However, be careful in case the

obstruction is caused by glass or needles caught inside

the hose.

Note: The warranty does not cover any damage to the hose

caused by cleaning it.

Cleaning the oor nozzle

37 To avoid deterioration of suction power, frequently clean

the carpet/ hard oor nozzle. The easiest way to clean it is

by using the hose handle.

Cleaning the turbo nozzle*

38 Disconnect the nozzle from the vacuum cleaner tube and

remove entangled threads, etc. by snipping them away

with scissors. Use the hose handle to clean the nozzle.

English

* Certain models only.

2193584-02Outline.indd 13 10/17/08 1:58:25 PM