Operating instructions
6
7
Before starting
Open the front cover on the machine and check that the
dust bag, s-bag
®
and the motorlter are in place. (See also
Replacement of lter(s))
10 Open the back lid on the machine and check that the
exhaust lter is in place.
11 Insert the hose until the catches click to engage (press the
catches to release the hose). (2). Insert the hose into the
hose handle until the catches click to engage (press the
catches to release the hose).
12 Attach the extension tube* or telescopic tube* to the hose
handle and nozzle by pushing and twisting together. (Twist
and pull apart to dismantle.)
13 Extend the electric cable and connect it to the mains. The
vacuum cleaner is tted with a cable winder. Once the
electric cable has been extended, it stays in that position.
14 To rewind the cable, press the cord rewinder button. The
cable will then rewind.
15 ON/OFF control: Push the ON-OFF button once to start the
vacuum cleaner. Push same button once more to turn it off.
16 Power Regulation: Twist the power control towards „max”
to increase the suction power. Twist the power control
towards „min” to decrease suction power. Additional suction
power control: Use the suction control on the hose handle.
17 Practical parking positions (and at the same time a
backsaving feature) when you pause during cleaning or
when you carry and store the vacuum cleaner.
18 You can also carry the vacuum cleaner using the handle
on top or on the lower front edge of the machine.
19 Keep the hose in place while storing the vacuum cleaner
by extending the elastic bumper cord and placing it across
the hose.
English
* Certain models only.
2193584-02Outline.indd 7 10/17/08 1:58:21 PM