User manual

The function switches off by se-
lecting a different fridge set tem-
perature.
2.6 EcoMode
For optimal food storage select the Eco-
Mode.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The temperature indicator shows the
set temperature:
– for the fridge: +4°C
To switch off the function:
1.
Press the Mode button to select an-
other function or nothing.
The function switches off by se-
lecting a different set temperature.
2.7 ShoppingMode
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the ShoppingMode to chill the products
more rapidly and to avoid warming the
other food which is already in the refriger-
ator.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The ShoppingMode switches off automat-
ically after approximately 6 hours.
To switch off the function before its auto-
matic end:
1.
Press the Mode button to select an-
other function or nothing.
The function switches off by se-
lecting a different fridge set tem-
perature.
2.8 Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing any button.
2.9 FreeStore mode
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
To switch off the function:
1.
Press the Mode button to select an-
other function or nothing.
If the function is activated auto-
matically the FreeStore indicator is
not shown (refer to "Daily use").
The activation of the FreeStore
mode increases the energy con-
sumption.
3. DAILY USE
3.1 Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal ac-
cessories with lukewarm water and some
neutral soap so as to remove the typical
smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage
the finish.
If DEMO appears on the Display, the ap-
pliance is in demonstration mode: refer to
“WHAT TO DO IF...” paragraph.
8
www.electrolux.com