User Manual

2. Press Option until the Multitab indica-
tor comes on.
The option stays on until you deactivate it.
Press Option until the Multitab indicator
goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the Multitab option.
2. Set the water softener to the highest
level.
3.
Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6.
Adjust the released quantity of rinse
aid.
5.6 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction. It is not pos-
sible to deactivate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1.
Press the on/off button to activate the
appliance.
2.
Press Reset for a few seconds.
3. Press and hold, at the same time, De-
lay and EnergySaver until the indica-
tors
, and
start to flash.
4.
Press Delay,
•
The indicators
and
go off.
•
The indicator
continues to
flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
5. Press Delay to change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6. BEFORE FIRST USE
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
51 - 70 91 - 125 9.1 - 12.5 64 - 88
2
1)
10
28
www.electrolux.com