User manual

EN
Before you start the programme, if
you wish to delay the start, press the
Delay Start button repeatedly, to select
the desired delay. The relevant light
illuminates.
This option makes it possible to delay
the starting of the washing programme
by 3, 6, and 9 hours.
After having pressed the Start/Pause
button, the “Washing ” pilot lights
comes on.
The “Door Lock ” pilot light
indicates if the door can be opened:
When the programme has finished, the
“End ” pilot light comes on.
It is possible to change any option
before the programme carries it out.
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to “O” and
then to the new programme position.
The washing water in the tub not be
emptied out. Start the new programme
by depressing the “Start/Pause”
button again.
When the pilot light “washing” comes on
this means that the machine is performing
the washing cycle.
You must select this option after you
have set the programme and before
you press the Start/Pause button. You
can cancel the delay time at any
moment, before you press the
Start/Pause button.
If you have already pressed the
Start/Pause button, and you wish to
cancel the delay time, proceed as
follows:
set the washing machine to PAUSE
by pressing the Start/Pause button;
use electrolux 13
Select the Delay start
on: the door cannot be opened. The
appliance is running.
light off: the door can be opened.
The washing programme is finished.
flashing light: the door is opening.
press the Delay Start button once,
the light relevant to the selected
delay goes off.
press the Start/Pause button again
to start the programme.
The selected delay can be changed
only after selecting the washing
programme again.
The door will be locked throughout
the delay time. If you need to open
the door, you must first set the
washing machine to PAUSE by
pressing the Start/Pause button and
then wait about 2 minutes.
After you have closed the door,
press the Start/Pause button again.
The Delay Start can not be selected
with Drain programme.
Important!
Programme progress display
Altering an option or a running
programme