User manual

ENGLISH
13
4. Select the desired programme
Turn the programme selector dial to the desired
position.
The light corresponding to the max spin speed for
the selected programme illuminates and the light of
the Start/Pause button starts to flash.
5. Select the required option(s)
The light corresponding to the depressed button
illuminates.
When selecting the Rinse Hold option the water of
the last rinse is not emptied out, to prevent the
fabrics from creasing.
6. Reduce eventually the spin speed
Press the Spin Reduction button repeatedly to
reduce the spin speed.
The relevant light illuminates.
EW 770 F
EW880F/EWF860/EWF882
Door
Spin
Reduction
650
End
500
750
in Progress
Prewash
Rinse
Hold
Quick
Wash
Heavy
Stains
O
9
0
6
0
E
4
0
3
0
4
0
3
0
3
0
3
0
C
O
T
T
O
N
S
Y
N
T
H
E
T
I
C
D
E
L
I
C
A
T
E
W
O
O
L
S
P
E
C
I
A
L
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the
ECO valve. Then run the cotton cycle 60°E, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out the “Prewash” or a “Stain
phase”, pour detergent into the appropriate
compartment marked .
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
C0065
C0064
P0004
Door
Spin
Reduction
650
End
500
850
in Progress
EWF860_EU.qxp 5/15/2006 10:47 AM Page 13