User manual

7.1
7.2
7.3
Indicator pilot lights When you start the programme by pressing the button
6, the washing phase pilot light (7.1) illuminates. This
means that the appliance is operating.
The additional rinses pilot light (7.2) illuminates when
the appliance performs an extra rinse.
When the programme has finished the end cycle pilot
light (7.3) comes on.
AT THE END OF THE PROGRAMME
The appliance stops automatically. The pilot
light of the button 6 and the pilot light cor-
responding to the just finished washing
phase go off. The light 7.3 illuminates.
If a programme or an option that ends with
water left in the tub has been selected and
the door remains locked to indicate that the
water must be emptied out before opening
the door.
Follow the below instructions to empty out
the water:
Turn the programme selector dial to
.
Select the draining or spinning pro-
gramme.
Reduce the spin speed if needed, by
pressing the relevant button.
Press the button 6.
At the end of the programme, the door can
be now opened. Turn the programme se-
lector dial to
to switch the appliance off.
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
Warning! If there are children or pets
in the house, activate the child safe-
ty device in the inner side of the door
frame (for more details read " Child
safety" in the chapter "Safety Informa-
tion").
Stand by: during programme setting
up and once the programme has finish-
ed, if the programme selector dial and
any button are not touched, after a few
minutes the energy saving system is
enabled. The pilot lights go off. The
green pilot light of the button 6 flashes
with a low frequency. By pressing any
button the appliance will come out of
the energy saving status.
DOOR SEAL
At the end of every cycle, check from the
door seal and remove objects that could be
trapped in the fold.
electrolux 17