User manual

• Screw the hose back to the appliance
and make sure the connection is tight.
• Turn on the water tap.
WHAT TO DO IF…
The appliance does not start or stops dur-
ing operation. Certain problems are due to
lack of simple maintenance or oversights,
which can be solved with the help of the in-
dications described in the charts, without
calling out an engineer.
During appliance operation it is possible
that the red pilot light of the button 6 flash-
es and one of the indicator pilot lights illumi-
nates to indicate that the appliance is not
working.
Before contacting your local Service Cen-
tre, please carry out the checks listed be-
low.
Fault code and mal-
function
Possible cause - Solution
The light of button 6 flashes and the light 7.1 illuminates: Problem with the water
supply
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked
• Clean the water inlet filters (read "Cleaning the water inlet fil-
ters" for more details).
The light of button 6 flashes and the light 7.2 illuminates: Problem with the water
drainage
24 electrolux