User manual

10
FirstUse
AutomaticOperation
HowtoUsetheRemoteControl
WhentheAUTOoperatingmodeis
selected,thefanspeedandtemperature
willbeautomaticallycontrolledandcannot
beset.
Fan
Fan
Cooling
Cooling
Time
Programmed temp.
DehumidifyingOperation
1 Ensure the unit is plugged in and power is
available.
2 Be sure the batteries are inserted correctly in the
remote control (the lights on the remote control
will be on).
3 SetthetimebyControlbuttonsandconrmby
pressing the Clock button.
4 Point the remote control to the indoor unit and
press ON/OFF button to turn the unit on.
The default operating mode is AUTO. Once you
select the operating mode with remote control,
the operating conditions will be saved in the
indoor unit’s microcomputer memory. The next
time the air conditioner will start operating under
the same conditions when you simply push the
ON/OFF button of the remote control.
IftheAUTOmodeisuncomfortable,you
canselectthedesiredconditionsmanually.
When the AUTO mode is selected, the air
conditioner will automatically select COOL, HEAT
(if applicable), or FAN only operation, depending on
the programmed and/or the room temperature.
Start
1 ON/OFF Button
Press this button to turn the air conditioner on.
The temperature indicator on the indoor unit
display lights on.
2 Press the Mode button to select AUTO.
3 The air conditioner starts functioning after approx
3 minutes.
Stop
1 ON/OFF Button
Press this button again to turn the air conditioner
off. The horizontal louver returns back to the
position upon shut down.
The DEHUMIDIFY mode works based on the
difference between the set temperature and the
actual room temperature.
The temperature is regulated while dehumidifying
through repeatedly turning on/off of the COOLING
operation or FAN only operation.
tips and information
DehumidifyingOperation