Service manual

SOI/DT 2007-02 dmm 7/66 599 38 61-92
3 TC1
3.1 GENERAL CHARACTERISTICS
The ENV060 electronic control system consists of
two electronic boards. One integrates the power and
control functions and the selector, the other the
display function, where also the LCD display is
connected.
The PCB is mounted on a casing fitted to the control
panel.
Version
TC1
Number of buttons
 Max. 8 (5 options + 1 start/pause + 2 for time driven)
Number of LEDs
 Max. 2 + LCD display
Programme selector
 15-21 positions with main switch (incorporated in the PCB )
Serial port
 DAAS-EAP communications protocol up to 115.200 baud
Power supply
 220/240V
 50/60 Hz (configurable)
Type of washing
 Jet-system
Rinsing system
 Jet-system
Motor
 Two-pole asynchronous, with three-phase tachometric generator (with
Inverter)
Spin speed
 600 ÷ 1800 g/’
Anti-unbalancing system
 FUCS
Water fill
 1 solenoid valve with 1 inlet – 2/3 outlets
Detergent drawer
 3 compartments: prewash/stains, wash, conditioners
 4 compartments: prewash/stains, wash, conditioners, bleach
Control of water level in the tub
 Electronic/analogue pressure switch
Door safety device
 Traditional (with PTC)
 Instantaneous
Power of heating element
 1950W with thermal fuses incorporated
Temperature control
 NTC sensor incorporated in the heater
Board with loudspeaker
 Board with emits some musical motifs
Sensors
 Water fill gauge (flowmeter)
 Aqua control