Upright Vacuum Cleaner Owner's Manual

Rountine Maintenance (continued)

Installing New Dustbag Ref: E82

Fold dustbag ﬂ aps of new bag

back and slide into unit. Make

sure inlet goes into opening on

dustbag.

Replace dustbag cover

on unit.

NOTE: Dustbag cover

cannot be closed

unless the dustbag is

installed properly.

Models Z2915 Z2920 Z2925

Emptying and Cleaning the Smartbox

NOTE: Switch cleaner off at the mains and remove plug

from the electricity supply before emptying or

cleaning the Smartbox.

Emptying the Smartbox:

It is important to empty the smartbox regularly. DO NOT allow

the Smartbox to become too full.

Remove dustbag/Smartbox cover.

Pull the Smartbox out of the cleaner.

Pull the Smartbox apart and empty the dust and debris into a

dustbin. Brush out the smartbox to remove the excess.

Washing the Smartbox:

The Smartbox can be washed in warm water. A small amount

of washing up liquid may be added. A brush may be used

to remove stubborn dust. Rinse the Smartbox thoroughly

and remove the excess water with a dry cloth. Dry the dust

container thoroughly (24 hours is preferred) before reﬁ tting to

the cleaner.