Datasheet

HOW TO ORDER
PUSH BUTTONS
®
C 17
PUSH BUTTONS
CHARACTERISTICS
• A tiny switch suitable for most miniature
equipments.
• High current switching up to 3 Amps @
120 VAC or 28 VDC.
AGENCY APPROVALS
File N° E195524
File N° E195524
C
SERIES 6A
• Sub-miniature
pushbutton
eledis
eledis
A E6
N° OF POLES/ELEC FUNCTIONS
11 SPDT / on (on)
52 SPST / off (on)
ACTUATORS
none
SF Snap-in + frame
BUSHING
F2 Unthreaded
F3 Threaded flat
F4 Unthreaded flat
F5 Threaded Long
F6 Short Unthreaded
TERMINATIONS
PC PCB
W5 Wire wrap 15.24 mm
ST Solder
H9 90° horizontal
H9S 90° horizontal snap-in
V9 90° vertical
V9S 90° vertical snap-in
U2 U bracket 11.68 mm
CONTACT MATERIAL
S Silver
A Gold
K(❉) Gold/Tin-Lead
G Gold over Silver
SEALING
E Seal
CAP - FRAME
COLOURS OPTIONS
1 (∆) White
2 Black (std)
3 Red
4 (∆) Orange
5 (∆) Yellow
6 (∆) Green
7 (∆) Blue
8 (∆) Brown
9 (∆) Gray
CAP OPTIONS
C3 Diam. 5.08 mm
C4 Diam. 7.62 mm
C9 Sq. 11.43 mm
-
SPECIFICATIONS
Contact Rating: S (silver) - 3A @ 120 VAC or 28
VDC - 1A @ 250 VAC - A (gold) or K* (gold/tin-lead)
- 0.4 VA max @ 20 VAC or DC max
Electrical life: 60,000 make and break cycles at full
load
Contact Resistance: 20 mΩ max. initial @ 2-4 VDC
- 100 mA, for both silver and gold plated contacts
Insulation Resistance: 1000 MΩ min.
Dielectric Strength: 1500 VRMS @ sea level
Operating Temperature: -30°C to 85°C
MATERIALS
Case: Dially phthalate (DAP)
Plunger: Thermoplastic polyester - black
Bushing: Brass nickel plated
Terminal support: Brass, electrotin plated
Housing: Stainless Steel
(∆) Min qty required
(❉) Only for 6A11 series
STANDARD HARDWARE
2 Nuts
1 Lockwasher