Product Specification and Care

Vessel Before Engraving
Vessel After Engraving
Faucet in the image
not included with the
vessel
! ! ! ! Product Specifications
Height = 5.5 inch"
Weight = 15lbs "
Width = 16.5 inch"
Depth = 16.5 inch"
Drain opening size = 1 3/4 inch"
Color = Clear glass with green tint "
Glass = Green tinted single layered tempered glass to ensure durability "
Overflow = all vessel sinks do not have an overflow and my require specific drain "
such as pop-up or twist."
! ! ! ! Care & Maintenance
Our stylish vessel sinks are scratch resistant, but to ensure your glass sink
continues to look its best, proper steps in care and maintenance must take place.
The glass vessel sink will chip or fracture with impact of a hard or heavy object, or
if improperly installed. The most frequent cause of damage is over tightening the
drain hardware at the installation. The glass surface can become spotted by hard
water deposits or even damaged by abrasion caused by improper cleaning. A
warm water rinse followed by a towel dry is recommended to prevent water streaks
or spots. The mineral water deposits can be cleaned with a non-abrasive cleaner.
DO NOT apply force when scrubbing the glass this may scratch or break the
vessel.
T