Elektralite LED Pro Line Pancake USER MANUAL (Version 2) ElektraLED (a division of Group One), 70, Sea Lane, Farmingdale, NY11735, U.S.A. T. +1 (516)-249-3662. F. +1 (516)-249-8870 WWW.ELEKTRALED.
1. Unpacking Thank you for choosing the Elektralite LED Pro Line Pancake fixture. For your own safety, please read this manual before installing the device. This manual covers important information on installation and applications. Please keep this manual for future reference. Elektralite LED Pro Line Pancake moving wash uses 108 high powered 3 watt LEDs in a balanced arrangement giving you incredible output. Please unpack it carefully and check whether it was damaged in shipping.
absolutely no exceptions. If Elektralite LED Pro Line Pancake is operated in any way different to the one described in this manual, Elektralite LED Pro Line Pancake maybe damaged and the guarantee will be void. 4. Installation Please refer to the picture below:- Screw the half cheeseboro or “C” clamp (not provided with the fixture) onto the U bracket supplied with Elektralite LED Pro Line Pancake.
5. DMX-512 Control Connection Connect the provided XLR cable to the female 5-pin XLR output of your Elektralite CP 20 or other DMX controller. The other end should be connected to the male 5-pin XLR input of the Elektralite LED Pro Line Pancake. Then daisy-chain out of the first Elektralite LED Pro Line Pancake and into the next Elektralite LED Pro Line Pancake or other dmx device. Never “Y” split the DMX connection.
6. Powercon Connectors. The Elektralite LED Pro Line Pancake is fitted with two Powercon connectors. The blue one is input while the white one is the output. In the box with the fixture is a 20 feet long Powercon male to female extension cable. If this is the first fixture in the "line" then remove the white Powercon connector and fit a 120 volt Edison plug (not supplied). From then on the Powercon extension cables are used for subsequent fixtures.
7.
The display screen will turn off after 30 seconds if no button is pressed on the display.
. Cleaning and maintenance. Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and many companies and installations do just that. However the net result is, no matter what the fixture, premature failure! Changing the oil in a car most people do on a regular basis. So with the fixtures regular maintenance it an excellent practice, if you want the fixtures to last.
. DMX Channel Assignments.
12** RGB Macros 000-004 No function 005-044 Red at max output then Green fading up and Red fading down. Then Green fades down as Blue fades up. All are out at 036 DMX. Then at 040 DMX Red & Blue at max output. Both fade out by 044 DMX. 045-049 050-094 095-099 100-149 150-154 155-166 167-178 179-190 191-202 203-214 215-226 227-238 239-250 13*** 14 No function Chases through all 4 colors RGBW. The speed of chase 050 DMX VERY slow to 094 DMX VERY fast. No function 8 colors fading in and out.
10.
Other Products. ElektraLED has other great products that are manufactured under the Elektralite product line. Go check out the website at www.myelektralite.com A preview of the products include:Elektralite LED Pro Line. 1018. 18 of QUAD leds producing a perfect homogeneous color mixing. Each LED has in-built ALL 4 colors (red, green, blue and white). The white is perfectly chosen to be the warm white, not normally associated with white in an led.
We were tired of expensive difficult to use Hazers! Meet the TurboHazer. Comes with remote and an optional DMX input Simple to use, maintain and in-expensive.
