User's Manual

MP-935WID

All Information and specification are subject to change without further notice

Getting Started

Package contents

Your

MP-935WID package includes:

• MP-935WID

• Earphones

• USB Cable

• Quick Start Guide

Powering ON your MP-935WID

To Power on your MP-935WID, press and hold Power key.

After the startup is complete, you will see a welcome screen and then show you the Internet Radio mode.

Charging your MP-935WID

Your MP-935WID comes with a rechargeable battery. To charge the battery, connect the small connector or the USB

cable into the PC or Notebook USB port, the first charge should takes at least 8 hrs or you can purchase the optional

AC-USB charger, and plug in the mini USB port to MP-935WID and plug AC-USB charger to the power source.

Setting up the Wi-Fi

Your MP-935WID can be easily connected to the Wi-Fi networks. When a Wi-Fi connection is required (for instance,

to play Internet Radio or Media stream) the MP-935WID will automatically look for a network and try to connect.

When starting the Wi-Fi connection, your MP-935WID will find all the Wi-Fi

networks SSID in the range. Network SSID will be listed in order of the signal

strength (with highest first) and protected networks, which requires a

password is indicated by a lock icon. as seen

When you are connecting the MP-935WID for the first time, you will have to setup the Wi-Fi network. To do this

please follows the steps below:

• From the main menu select the system mode using the using ▶▶

▶▶▶▶

▶▶ and ◀◀

◀◀◀◀

◀◀ buttons to navigate.

• Next select the Wi-Fi from the menu.

• goto the ‘Wi-Fi setup Wizard’ as shown: