Instruction manual

-20-
ASSEMBLY INSTRUCTIONS FOR BLOCKS 3 & 4
Turn the switch OFF and remove the battery. Solder the parts to the PC board and put a check mark in the box
(!) next to each part after it is installed. The parts should be similar to the sketch in each box, but will differ in
size. Be sure to check each solder point for shorts and cold solder connections.
C9 - .1µF
Capacitor
(104)
104
F2 - 10.7MHz Filter
Ignore polarity markings
(either direction)
Figure 23
C7 - 470pF
Capacitor (471)
C8 - 7pF
Capacitor (7)
C11 - .01µF
Capacitor (103)
C13 - .01µF
Capacitor (103)
C16 - .01µF
Capacitor (103)
103
R3 & R7 - 3.3kΩ Resistor
(orange - orange - red - gold)
R5 - 20kΩ Resistor
(red - black - orange - gold)
C10 - .001µF
Capacitor
(102)
102