Instruction manual

C2 - .047µF
Capacitor (473)
-6-
C2 - .005µF Capacitor
(502)
CONNECTING PARTS TO THE BACK SIDE OF THE PC BOARD
Twist two leads of a 10resistor and a .047µF capacitor as shown in Figure 8a. Solder the wires close to the
components and clip off any excess wire.
Mount the components shown in Figure 8 to the foil side of the PC board. Place a check mark in the box (!)
after each part is in place.
502
R15 - 10 Resistor
(brown-black-black-gold)
473
Figure 8
473
(brown-black-black-gold)
Figure 8a
C22 - .047µF Capacitor (473)
R15 - 10 Resistor
Solder