User's Manual

Elettronica GF s.r.l.
Via Vittori, 63 - 48018 - FAENZA (RA) ITALY
Tel. [phone] Fax [phone]
IVA – Cod.Fisc. – Reg. Imprese: IT-02288800390
This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is
prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF.
MAN0615D01.A04
pag.
4/9
2. Regulatory Approvals and Compliance
Modules NFC/BLE (Gymkit) 5V RS232 board have received regulatory approvals in the United States (FCC)
and Canada (IC). Such approvals and qualification allows the user to place the module inside a finished product
and, in most cases, not require regulatory testing for an intentional radiator, provided no changes or
modifications are made to the module circuitry. This does not preclude the possibility that some other form of
authorization or testing may be required for the finished product.
Changes or modifications could void the user’s authority to operate the equipment. The end user must comply
with all of the instructions provided by the Grantee, which indicate installation and/or operating conditions
necessary for compliance.
2.1. United States FCC Part 15
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manifacturer’s instruction manual, may cause interference with radio and television
reception. This equipment has been tested and found to comply with the limits for Class B digital device
pursuant to Part 15 of the FCC Rules.
1- This device may not cause harmful interference
2- This device must accept any interference received, including interference that may cause undesired
operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Elettronica
GF s.r.l. could avoid your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference with radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the
following measures:
 Reorient the receiving antenna.
 Relocate the system with respect to the receiver
 Move the system away from the receiver
 Plug the system into a different outlet so that the system and the receiver are on different branch
circuits.
If necessary, consult a representative of Elettronica GF s.r.l. or an experienced radio/television technician for
additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with
the FCC regulations:
 Product name: NFC/BLE (Gymkit) 5V RS232 board
 Model Number: 0615D
 Company name: Elettronica GF s.r.l.
End product labelling:
Using a permanently affixed label, the modular transmitter is labelled with its own FCC identification number,
and,
If the FCC identification number is not visible when the module is installed inside another device, then the
outside of the device in to which the module is installed must also display referring to the enclosed module.