User's Manual

Elettronica GF s.r.l.
Via Vittori, 63 - 48018 - FAENZA (RA) ITALY
Tel. [phone] Fax [phone]
IVA – Cod.Fisc. – Reg. Imprese: IT-02288800390
This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is
prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF.
MAN0615D01.A04
pag.
5/9
Contains FCC ID: O6R3153, FCC ID: 2ARDN0615D
2.2 Canada IC RSS-210
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two
conditions:
1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
NOTICE: The IC regulations provide that changes or modifications not expressly approved by Elettronica GF
s.r.l. could avoid your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference with radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the
following measures:
 Reorient the receiving antenna.
 Relocate the system with respect to the receiver
 Move the system away from the receiver
 Plug the system into a different outlet so that the system and the receiver are on different branch
circuits.
If necessary, consult a representative of Elettronica GF s.r.l. or an experienced radio/television technician for
additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with
the IC regulations:
 Product name: NFC/BLE (Gymkit) 5V RS232 board
 Model Number: 0615D
 Company name: Elettronica GF s.r.l.
End product labelling:
Using a permanently affixed label, the modular transmitter is labelled with its own IC identification number,
and,
If the IC identification number is not visible when the module is installed inside another device, then the outside
of the device in to which the module is installed must also display referring to the enclosed module.
Contains IC: 3797A-3153, IC: 24364-0615D