User's Manual
Elettronica GF s.r.l.
Via Vittori, 63 - 48018 - FAENZA (RA) ITALY
Tel. (+39) 0546 622245 Fax (+39) 0546 622301
IVA – Cod.Fisc. – Reg. Imprese: IT-02288800390
This document and informations herein is the property of Elettronica GF and all unauthorised use and reproduction is
prohibited. All rights reserved. Confidential, Unpublished Property of Elettronica GF.
MAN0615D01.A04
pag.
8/9
8. Operating Mode
The NFC/BLE (Gymkit) 5V RS232 board operates with both user keys based on Mifare protocol (TGS Mifare
and Band Key) and NFC smartphones. The minimum reading distance with NFC devices must be at least 15
mm.
In case of interaction with user key or smartphone NFC, the user data are not collected or stored by the reader.
The reader make a “bridge” by protocol from user key or smartphone NFC to application connected to reader.
If a BLE connection is established with external device, the reader receive data and transmit by RS232 to
application connected to reader: the user data are not collected or stored by the reader.
The NFC/BLE (Gymkit) 5V RS232 board operates with the following transmitter specifications:
Work Frequency: 13,56 MHz
Frequency Range: 13,553-13,567 MHz
Electric Field @ 30m: < 0.5 mV/m