Installation Guide
1
Removing the existing fixture
3
Connecting the wires
4
Installing the ceiling fixture
Installation
2
Install Fixture Mounting Screws
TOOLS REQUIRED FOR INSTALLATION
AND ASSEMBLY
(not included):
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
A. Install xture mounting screws (A)
A. Remove the existing xture.
A. Connect the white supply wire to the white xture wire.
B. Connect the black supply wire to the black xture wire.
C. Connect the ground supply wire to the ground xture wire.
D. Use wire nuts to secure all connections.
WARNING: Installation must be performed by a
qualied licensed electrician.
DANGER: Before installation, turn o the main
power at the circuit breaker.
A. Install the xture base onto xture screws and
secure by turning clockwise into slots.
B. Tighten xture housing screws. Do not over tighten.
C. Install the Lens inside the xture and turn clockwise.
Hand tighten only. Do not over tighten.
A
BLACK Supply Wire
BLACK Fixture Wire
WHITE Fixture Wire
WHITE Supply Wire
GROUND Supply Wire
GROUND Fixture Wire
LED Surface Mount Disc Light Models 8136-8137-8112-8113
LIMITED WARRANTY
The manufacturer warrants this product to be free of defects in materials
and workmanship for a period of 3 years from date of purchase. This
warranty applies only to the original purchaser. If this product is found to
be defective, the manufacturer’s only obligation and your exclusive remedy,
is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modications, alterations, neglect or mishandling. This warranty
shall not apply to any product that is found to have bee improperly installed,
set-up, or used in any way not in accordance with the instructions supplied
with the product. This warranty shall not apply to the nish on any portion
of the product, such as surface and/or weathering, as this is considered
normal wear and tear. The manufacturer specically disclaims any liability
and shall not be liable for any consequential or incidental loss or damage,
including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
www.HomeSelects.com info@HomeSelects.com