Instructions / Assembly

14
TROUBLE SHOOTING TIPS
The light does not turn ON
1. Confirm the AC power cord from the light is not damaged or cut.
2. Check if circuit breaker that controls the AC outlet that the light is plugged into is not tripped.
3. Confirm the power connection is not loose.
4. If none of these solutions work, please contact Eliminator Lighting Customer Service.
The unit is not responding to DMX.
1. Check that the DMX cables are connected properly and are wired correctly.
2. Check that all cables are connected to the right connectors.
FREQUENTLY ASKED QUESTIONS
Listed below are a few answers to common questions users may have.
1. Is there a fuse? Can it be replaced?
There is no replaceable fuse.
2. Is there a mini par with UV and white light?
Yes, the Mini Par UVW LED is available and can be purchased from www.adj.com
OPTIONAL ACCESSORIES
Order Code
Description
PWR793
Power Bar with six 3-prong Edison sockets.
PWR571
POW-R BAR65 utility block w/ surge protected AC sockets and USB.
AC3PDMX3
3-Foot 3-Pin male to female DMX Cable*
LTS-6
Collapsible Tripod with T-Bar for hanging lighting fixtures.
* Additional lengths available at www.adj.com