User manual

46
CLOSED CAPTION DECODE FUNCTION
Closed caption broadcasting (character
information) in the video signal allows the
displaying of characters on the screen. This unit
has a closed caption decoder which allows, these
titles to be displayed when receiving these
broadcasts or playing a video cassette or Video
Disc with the
CC
mark, etc.
3
MENU
END
SET
SET
SELECT
c
c
CC
MOD E : CC – 1
CC: OFF ON ON I F MUTE
1
Press MENU and select CC by using the
| or \ button and then pressing «
button. (Refer to page 26.)
2
Select CC in the same way.
MENU
END
SET
SET
SELECT
c
c
CC
CC: OFF
MOD E : CC – 1
Set CC to ON or ON IF MUTE.
• If you have selected ON IF MUTE, closed captions will be
displayed only while MUTE is functioning with the MUTING
button pressed while you are viewing or listening to the
program.
4
Select MODE .
NOTES:
• When a video cassette or Video Disc carrying the
CC
mark etc. is played, the closed caption signal
may not be output depending on your VCR or Video
disc player.
• During TV broadcast reception, closed caption
signal may not be decoded properly if the receiving
broadcast signal is weak.
• Closed caption signal may not be decoded properly
depending on the recording condition of the video
cassette tape.
• The character information will not be displayed
while a menu is displayed. To turn on the character
information, press the MENU button and turn off
MENU.
• This function can be used only during TV and 480i
input.
5
Select the desired CC (Closed Caption CC-
1 to CC-4) or TEXT (TEXT-1 to TEXT-4).
MENU
END
SET
SET
SELECT
c
c
CC
MOD E : CC – 1
CC: ON
TEXT– 1
TEXT– 2CC– 2
TEXT– 3CC– 3
TEXT– 4CC– 4
6
After setting, press MENU to turn the
menu off.
MENU
END
SET
SET
SELECT
c
c
CC
MOD E : CC – 1
CC: ON
ARB1557A_En_041_046.P65 8/8/03, 16:5046