i
Preface Copyright 2010 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Table of Content ATTENTION: TEACHERS, PARENTS AND ADULT SUPERVISORS ................. 2 SAFETY PRECAUTIONS ........................................................................ 3 CARING FOR YOUR COMPUTER ............................................................ 3 AGENCY REGULATORY NOTICES ............................................................. 5 FEDERAL COMMUNICATIONS COMMISSION NOTICE................................ 5 Modifications................................................................
To Remove the Battery Pack: ................................................................ 24 LITHIUM-ION BATTERY ....................................................................... 24 Battery Low-Power Warning................................................................. 25 Charging the Battery and Charging Time ............................................. 25 Checking the Battery Level....................................................................
Capture Application .............................................................................. 54 Burst ...................................................................................................... 54 Video Capture ....................................................................................... 55 FUNCTION SETTING ........................................................................... 55 SECONDARY FUNCTION .....................................................................
1
Attention: Teachers, Parents and Adult Supervisors This product is an educational tool designed for school children, ages 6 and up. There must be supervision by an adult on school children under 10 when using this Intel-powered classmate PC. It is a must to have a thorough explanation to students on safe and proper handling of the Intel-powered classmate PC, power supply, battery pack, and power cord.
Safety Precautions The following are lists of precautionary measure the students must understand before using this computer inside the classroom or home environment: 1. 2. 3. 4. 5. 6. Do not place near fire or other sources of heat. Do not expose to magnetic fields. Do not expose to direct sunlight. Do not expose to rain or moisture. Do not place heavy objects to add heavy pressure on the computer. Do not drop the computer.
4
Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Connections to Peripheral Devices Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. SAR Exposure Intel-powered clamshell classmate PC has been tested for and found to be in compliance with FCC RF Exposure Limit. During extended periods of use the integrated antenna located at the top left corner of the display screen should be positioned at least 20cm from users or nearby persons.
EN 300 328-2, EN 300 328-1, EN 301 489-1, EN 301 489-17 (ETSI 300 328, ETSI 301 489) Electro-magnetic Compatibility and Radio Spectrum Matter. EN60950 (IEC60950) I.T.E. Product Safety Canadian Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
The minimum specification for the flexible cord for Class II product are: (1) 2X0.75 mm2 conductors, (2) 2-conductor cord. The cord set must have a current capacity of at least 10 A and a nominal voltage rating of 125 / 250 VAC. This model is designed to use with the following AC Adapter model only. Manufacture: LISHIN INTERNATIONAL ENTERPRISE CORP. Model: 0225C2040 (AC 2 Pin) Model: 0225A2040 (AC 3 Pin) Manufacture: DELTA ELECTRONICS, INC.
Danger of explosion if battery is incorrectly replaced. Only qualified service technicians should replace and discard the battery pack. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions or local laws. Explisionsgefahr bei unsachgernazen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers.
11
Getting To Know The Basics Welcome to the Intel-powered Clamshell Classmate PC Congratulations on your purchase of Intel-powered classmate PC. Intel-powered clamshell classmate PC features the latest advances in portable computing technology. Intel-powered clamshell classmate PC modular design provides maximum expandability without compromising portability.
To avoid damage to the display panel: 1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel. With the LCD screen open, you will see several features important for operating your Intel-powered clamshell classmate PC.
1. Camera Use this camera for any video conferencing application. 2. LCD Display The panel is where the system content is displayed. 3. Power/Suspend Button Press momentarily to turn on the system. Press and hold for at least 4 seconds to turn off the system. Press the power/suspend button again to return from the suspend mode. 4. LED Status Indicator The LED Status Indicator displays the operating status of your Intel-powered classmate PC. When a certain function is enabled, a LED will light up.
Blue light indicates the WLAN module is active. Blue light indicates the system is ON. The battery LED reflects according to the following status: Blue light indicates the battery is fully charged and the AC Adapter is plugged in. Red light indicates the battery is charging. Blinking red light indicates the battery power is low. No light indicates that the battery pack is not installed in your system. Red light indicates the system is operated by battery where the capacity is low. 5.
10. Touchpad Buttons Works like the two buttons on an ordinary mouse. Water Resistance Precautionary Measures on Keyboard, Power Button and Touchpad Buttons The Intel-powered clamshell classmate PC features a spillresistance function on keyboard, power button and touch pad buttons to ensure greater protection against spills in the classroom or anywhere. These are the ways to avoid damage to your system: 16 Save all important documents within 3-minutes.
Power On the system after letting it dry up for four hours. These procedures only apply for water resistance keyboard, power button and touchpad buttons. Please take note that it can cause a severe damage to the system if the user uses the abnormal procedure (pressing the Ctrl-Alt-Del key combination) and forcibly shut down the system.
1. 2. 3. Kensington Lock This security lock provides the best options for physical security of computer in preventing the computer from being stolen. Ventilation Grill The ventilation opening allows the system to cool off and prevent overheating. Do not block this opening when the system is turned on. Ethernet / LAN Port When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. 4. USB 2.0 Ports This port conforms to the latest USB2.0 plug-and-play standards.
4. 5. 6. USB 2.0 Ports This port conforms to the latest USB2.0 plug-and-play standards. External Monitor Port Use this port to connect to an external monitor. Power Jack (DC-in) The DC-out jack of the AC Adapter connects here and powers the computer. Bottom View 1. 2. 3. 4. Keyboard Release Screws Unscrew these two screws to release the keyboard. Built-in Stereo Speakers The built-in speakers output the sound in stereo. Battery Compartment This compartment contains the battery pack of your system.
CardReader 20
Getting Started Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. To connect the computer to an external power source: Do not use inferior extension cords as this may result in damage to your Intel-powered classmate PC.
Never turn off or reset your Intelpowered classmate PC while the hard disk is in use; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Intel-powered classmate PC before turning it back on; turning the power on and off in rapid succession can damage the Intel-powered classmate PC’s electrical circuitry. Turning On Your Computer Turn on your Intel-powered classmate PC by pressing the power button.
The Battery Pack To Install the Battery Pack: Align the battery pack and insert into the battery bay. Slide the battery pack gently but firmly until it locks into place. Slide the battery lock into locked position.
To Remove the Battery Pack: Slide the battery lock switch left into unlocked position. The battery pack will pump up from the battery bay. Slide and hold the battery release latch then slide the battery pack up. Lift up the battery pack from the battery bay. Lithium-Ion Battery Your Intel-powered classmate PC uses a Lithium-Ion battery pack that provides power when you don’t have access to an AC outlet.
You must charge the battery pack for at least six hours before using it for the first time. In the Standby Suspend mode, a fully charged battery loses its power in roughly 1/2 day or less. When not being used, the battery’s power will deplete in one to two months. The battery pack in this system is replaceable by the end user. Battery Low-Power Warning 1. Low Battery Warning Low battery condition occurs when battery power is reduced to 10 percent.
When the battery is fully charged, the battery charge indicator becomes blue. If system runs at heavy loads or in a high temperature environment, the battery may not be fully charged. You need to continue to charge it with the AC adapter plugged in until the charging LED turns blue. System will not charge battery when temperature exceeds 45C. Checking the Battery Level You can check the remaining battery power in Operating System battery status indicator.
Fully charge the battery. Then discharge the battery by entering the BIOS setup screen. (Press DEL key as soon as you turn on the computer. And let it remain at the setup screen until the battery runs out. Fully charge the battery again. Using Power Options Operating System Power Management provides basic power saving features. In the power configuration dialogue box, you may enter time-out values for display and hard disk drive.
Power Button Action Intel-powered clamshell classmate PC power button can be set to turn off the system or activate the suspend mode.
29
Using Intel-powered Clamshell Classmate PC Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. + - Changes Display Mode: LCD-only, CRT-only, LCD/CRT simultaneously + - Decreases the brightness level of the screen. It also disables the auto brightness (Light Sensor) adjustment. + - Increases the brightness level of the screen. It also disables the auto brightness (Light Sensor) adjustment.
Do not press on, or store any objects on the cover when it is closed. Doing so may cause the LCD to break. Intel-powered clamshell Classmate PC Hot Key Controls Function Keys (Quick Keys) Function Keys (Quick Keys) + - WLAN on/off. + - Enters the Suspend Mode. + - Mute the system volume + - Decreases the speaker volume. + - Increases the speaker volume.
+ - Decreases the brightness level of the screen. + - Increases the brightness level of the screen. + - HSPA on/off + - Enable/Disable light sensor. + - Enable/Disable touchpad. + - Enable/Disable webcam.
The touchpad is a rectangular electronic panel located just below your keyboard. You can use the static-sensitive panel of the touchpad and slit it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons. TouchPad Precautions The TouchPad is a pressure sensitive device. Please take note of the following precautions. Make sure the TouchPad does not come into contact with dirt, liquids or grease. Do not touch the TouchPad if your fingers are dirty.
G Sensor (Optional) The Hard-Disk Drive (HDD) Protection application protects the notebook HDD from damage caused by sudden harmful notebook shocks. It monitors system movements that exceed the defined shock threshold. Once a shock is detected, the application instructs the HDD to temporarily park it’s heads which protects against potential damage the drive. When the notebook motion stabilizes the heads are then un-parked.
35
BIOS Setup And Security Feature The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Output System). It runs and maintains a variety of hardware functions. It is menu-driven software, which allows you to easily configure and change the settings. The BIOS contains manufacture’s default settings for the computer’s standard operations. However, there are occasions when you may be required to modify the default settings in the BIOS.
BIOS Action Keys Legend Key Alternate Key Function F1 Displays the General Help window. It can be enabled from anywhere in the BIOS. Esc Jumps to the Exit menu or returns to the Main menu from a submenu. Selects the menu item to the left. Selects the menu item to the right. or Keypad arrow keys Moves the cursor up and down between fields. Tab Enter Moves the cursor to the next position available in the field. Minus Scrolls backward through the values for the highlighted field.
Main Setup Under this menu, you may change time/date and view basic processor and system memory information. Due to various configurations on this model, your system may show different information. 38 System Time: Type in the current time, in HH:MM:SS format. System Date: Type in the current date, in MM/DD/YY format.
Advanced Setup Security 39
Boot Setup Exit Setup 40 Save Changes and Exit: After you have completed the BIOS settings, select this item to save all settings, exit BIOS Setup utility, and reboot.
power-up. F10 key can be used for this operation. Discard Changes and Exit: Discards changes done so far to any of the setup questions and exit. Discard Changes: Discards changes done so far to any of the setup questions. Load Optimal Defaults: Load Optimal Default value for all the setup questions. F9 key can be used for this operation.
42
3G Connection (Option) 3G Connection 3G is the third generation of mobile phone standards and technology. 3G enable users a wide range of more advanced service while achieving greater network capacity through improved spectral efficiency. Press the hot key combination of Fn + F9 to verify 3G card status (Enable or Disable?) if it is Enable, then click the 3G application icon to start executing the application.
Procedures in installing the application Insert the SIM card into the SIM slot. Execute the application by pressing the Mobile Partner icon 44 From the Mobile Partner display window, click on the “Tools” item Select the “Options”.
Double click on the “Profile Management” and click on the “New” tab Click on the “OK” tab.
On the next window, click on the “Connect” tab. All configuration setting was completed, please click save icon to save all setting.
47
Wimax/WiFi Connection Remove the battery from its compartment Press on the two knobs inside the battery compartment. A clicking sound will be heard indicating the keyboard is now release. Turn the computer facing you and lift up the keyboard from its compartment. Slide the plate to left direction.
49
50 Locate the Wimax connector as shown on the illustration. Remove the screw to release the Wimax card.
51
52
Web Camera Application This application offers video conferencing capabilities to work and communicate in real-time with one or more participants through streaming video, from any location. Press the “Camera” icon key to display the “WebCam Companion” screen display. Click on the “Capture” icon.
Main Function Capture Application Use this function to capture the image file of the other party when you are on video conferencing.
Use this function to continue on capturing the current image that appears on your display to numerous pictures. Video Capture Use this function to capture any video file.
Webcam Setting Adjust the brightness, contrast, hue and saturation of your captured image or video file. Disconnect Secondary Function 1.
All the photos that you captured will be displayed alternately. 2. 3. 4. 5. Find Target – Use this function to locate the drive that you would like to save the file that you have currently captured. Email – Use this function to mail the file that you have captured. Print – Use this function to print the file. Trash – Click on the image or video file that you would like to delete and drag it to this icon.
2. 3. 4. 5. 6. 7. 8. 9. Zoom Out – Use this function to shrink the photo file. Rotate Left 90 degrees – Use this function to rotate the photo into counter clockwise direction. Rotate Right 90 degrees – Use this function to rotate the photo into clockwise direction. Flip – Use this function to flip the photo file from left to right angle. Undo – Use this function to switch back to the original angle. Redo – Use this function to switch to the new angle.
59
Troubleshooting Your computer has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling may cause problems. You may also encounter simple setup or operating problems that can solve by considering the following suggestions. If the problem persists, contact your dealer for service. Check to see if the power cord is properly plugged into the wall outlet and to the computer. Check to see the power indicator of the computer is on.
61
Specification Operating System Support Windows XP Professional/Home edition (SP3) Support Windows 7 Starter/Home Basic/Professional CPU Intel® AtomTM processor N455, 1.66GHz/512K L2 Memory DDR3 667 So-DIMM DRAM module, 1GB, So-DIMM 204-pin socket * 1 Core Logic Intel® NM10 Express Chipset Audio Codec Realtek ALC269-VB Azalia integrated audio Analog 2.1 D3 mode support Card reader (Optional) 62 Support SD / SDHC/ MMC Memory Card. USB 2.
G-sensor HDD SKU protection LAN Controller Supports 10 and 100 Mb/sec. Full and half Duplex operation Wireless LAN Half Mini-card form factor Wi-Fi 802.11 B/G/N 1x2 Open mesh support on Linux only PCI-E interface Keyboard Integrated QWERTY keyboard W/ Hot key 83 UK / 84 US KEY K/B Multi-languages Supported Pointing Device PS/2 Touch Pad with Left and Right Click Button and scrolling Bar Camera (Optional) USB2.0 interface 30fps @ 640x480, 0.3M 7~9 fps@ 1280x1024,1.
Storage SSD SATA 8G/ 16G / 32G SSD MLC 2.5” HDD Single-HDD for 2.5" 9.5mm SATA support Support SATA 2.0 5400rpm support 160G LCD 10.1” with 1024x600 resolution 3.75G / WIMAX (Optional) Wireless Broadband module support USB interface, Mini-card type HSPA/ modules support Connection Manager AP support for Broadband section HSPA module w/ 2 antenna support Battery Pack 3 cell 3S1P 11.1V / 2200mAH (3S1P), 3.7V/2200mAH LG/BAK cell 6 cell (3S2P) 11.1V / 4400mAH (3S2P), 3.
Support external USB flash memory card boot up. Physical Outline Dimension: 267.6mm W x 234.7mm H x 29.9~34.7mm Weight: 10.1" W LCD /HDD/ CAM/ 6cell battery pack: 1.462 Kg 10.1" W LCD /HDD/ CAM/ 3cell battery pack: 1.346 Kg EMC CE, FCC, CCC RF FCC&SAR / R&TTE Safety UL / CB CCC WEEE RoHS (Restriction of Hazardous Substances, EU directive 2002/95/EC + amendments) Energy Star Compliance 5.
