User's Manual

ManualsBrandsELK Products ManualsElectronicsPIR Sensor

ELK-6030 PIR Installation Manual Page 1

ELK-6030

Wireless PIR Motion Sensor

For the latest downloadable version of this manual visit our website: http://www.elkproducts.com

Installation and Setup Guide

APPLICATION & OVERVIEW

The ELK-6030 Wireless PIR Motion Sensor is designed for use with

control/transceivers that accept Elk's two-way technology; such as

the ELK-M1XRFTW. It is intended for use in residential and light

commercial installations and incorporates many features designed to

ensure its reliable performance.

The dual element pyroelectric sensor in the 6030 detects movement

within a specific coverage area, by sensing the infrared energy that is

emitted from an intruder moving across the sensor's field of view. A

change in the infrared energy creates a temperature change in the

sensor's zones, which is then processed to determine if the occurrence

qualifies as a legitimate motion detect event. If it does then the built-in

radio will be triggered.

The two-way radio (RF) in the 6030 transmits alarm, tamper, supervisory,

and low battery messages to the control/receiver. Each sensor has a

unique TXID number which is enrolled into the control during installation.

With its two-way capability, the 6030 radio listens after every

transmission for a positive acknowledgment from the control. This

makes the sensor very energy efficient since it doesn't waste battery

power repeating transmissions unless they are not acknowledged.

Like all battery powered motion detectors, the 6030 has a mandatory

sleep cycle function to help extend the battery life. After detecting

motion, the sensor's radio will transmit the event to the control and wait

for acknowledgment. Upon acknowledgment the sensor will enter the

mandatory sleep cycle. During the sleep cycle time it cannot transmit

additional events. There are two (2) time choices for the sleep cycle, both

selected via DIP Switch #4. After the sleep cycle expires the sensor will

once again be capable of transmitting a new event.

The 6030 introduces the industry's first Security/Convenience Light.

This high-intensity white LED projects a beam of light out in front of the

sensor. It offers five (5) activation/operation modes: 1)Flash during

any audible alarm activation as a visual deterent. 2)On Solid for a timed

period when motion is detected and control is armed to the Away mode.

(This can be disabled or modified so that it only works during certain

conditions or time periods) 3)Flash on command for a timed period as

a special attention grabber or general purpose indicator. 4)On Solid on

command for a timed period to illuminate the immediate area (camera

surveillance, etc.) 5)Quick blip in walk test mode when a coverage zone

is tripped.

FEATURES

• Wireless two-way communication

• Dual-element pyroelectric sensor

• Selectable pulse count

• Selectable Hi/Lo range

• Excellent immunity from white light, RF, and ESD interference

• Green/Red (Bi-Color) RF Acknowledge LED

• White LED - Security/Convenience Light

• Long life Lithium batteries {supplied}

• Low battery trouble signal

• Sleep Cycle "Battery Saver" (2 time settings)

• Hourly supervision (check-in) signals

• Cover tamper protection

• Swivel mounting bracket included

• Optional deluxe 90° swivel bracket for ceilings sold separately

SPECIFICATIONS

• Dimensions: 2.8"W x 4.4"H x 1.9"D

• Mounting Height: 6 1/2 to 7 1/2' ft

• Sensor: Dual element pyroelectric

• Coverage: 39 ft x 49 ft (12m x 15m) @ 88.2°

20 dual element zones (2 Long, 10 intermediate, 4 mid, 4 short)

plus look down (creep zone)

• Pulse Count: 1-2 or 3-4, selectable

• Sleep Time: Selectable 30 sec. or 120 sec.

• RF Signal Acknowledge Indication: Green/Red (Bi-Color) LED

• Security/Convenience Light: White LED

• Warm Up Period: 10 seconds

• Operating Voltage: 3.0 Volts DC

• Battery Type & Size: 2 x Lithium CR123A

• Quiescent Current: < 10 µA

• Operating Temp: 32° to +120° degrees F

• Humidity: 95% RH (max.), non-condensing

• Frequency: 902 - 928 Mhz channel hopping

PACKAGE CONTENTS

1 - 6030 PIR electronics assembly & back housing

1 - Standard swivel bracket, locking disc, screws & anchors

1 - Blanking plug

2 - CR123A Lithium Batteries

1 - Cover locking screw

UNIQUE 'INDUSTRY FIRST'

SECURITY/CONVENIENCE LIGHT

Summary of content (4 pages)

PAGE 1
ELK-6030 Installation and Setup Guide Wireless PIR Motion Sensor APPLICATION & OVERVIEW The ELK-6030 Wireless PIR Motion Sensor is designed for use with control/transceivers that accept Elk's two-way technology; such as the ELK-M1XRFTW. It is intended for use in residential and light commercial installations and incorporates many features designed to ensure its reliable performance.
PAGE 2
GUIDELINES FOR USE INSTALLATION The 6030 Sensor is for indoor use only. It may be mounted directly on a wall or in a corner, with or without the supplied swivel bracket. 1. OPENING THE HOUSING - Remove the locking screw along the bottom (if installed). Push in the retainer tab and lift the front away from the backplate. It is recommended that the ELK-6030 be located within 100 feet of the control/transceiver.
PAGE 3
4. SENSOR ENROLLMENT FROM ELKRP DIP SWITCH OPTION SETTINGS 5. 4.1 Launch the ElkRP PC software and open the desired Customer Account file. ON OFF 6 4.2 Click the "+" next to Zones (Inputs) to expand the view. Look to see if there are any existing wireless zone groups. If there are none then it will be necessary to add or create a new group. To create a wireless group, right click on Zones (Inputs) and click New Wireless Zones. Place a check mark in the box to be added, starting with Group 2).
PAGE 4
ANTI-TAMPER SWITCH This switch detects the separation of the front housing from the backplate. When this is tripped a signal is transmitted to the control/transceiver, causing the associated zone to become violated. Snapping the front housing back onto the backplate transmits a restoral. Note: Tamper can be ignored for any sensor (zone) by setting its Zone Type to 1=Normally Closed.