User Manual

16
7. Carefully line up the Alarm on the base, gentle
press home & twist on. (see figure 4) This
connects the batteries and the red, amber & green
lights will immediately flash in sequence to show
they are working.
8. Wait 15 seconds and then press the Test button
to ensure that the Alarm works (see figure 5).
9. Install all the other Alarms similarly.
4.2 How to Tamperproof the Alarm
The Alarm can be made resistant to unauthorized
removal. Break off the small pillar on the base as
shown in figure 6a. To remove the Alarm from the
ceiling it is now necessary to use a small
screwdriver, to release the catch (push catch
towards the ceiling) and then twist off the Alarm
(see figure 6b).
Red
Light
Amber
Light
Green
Light
Test
Button
Figure 5
Figure 6a Figure 6b Figure 7