User Manual

21
the power switch to the ON position (See fig 9). Fill
a suitable size plastic bag with smoke from the joss
stick or cigarette. Insert the Alarm into the smoke filled
bag and seal it closed. Within seconds, the red light will
begin to flash (as per Table B) to confirm that the Alarm
has detected the CO gas in the bag.
To check the Alarm sound, momentarily press the
test button and within seconds the horn will sound
briefly. Slide the power switch to the OFF position and
replace the Alarm on its mounting plate.
OFF
Position
ON
Position
Figure 9
6. What to do when the alarm sounds
Warning! “Actuation of your CO Alarm indicates the presence of carbon
monoxide (CO) which can KILL YOU. If an alarm signal sounds:
1) Operate reset/ Silence button:
2) Call your emergency services Fire Department or 911
3) Immediately move to fresh air – outdoors or by an open door/ window. Do a head
count to check that all persons are accounted for. DO NOT re-enter the premises
until the emergency services responders have arrived, the premises have been aired
out and your Alarm remains in its normal condition.