User's Manual

M1KPNAV Navigator Touchscreen Keypad - User Guide
Page 11
Automation - Task Activation
A Task is an M1 feature that is similar in operation to a “macro” found in a
word processor or spreadsheet program. It allows a series of automation
steps or processes to be activated by a single button press. Each task may
have a name such as: Water the Lawn (to turn on electric water valves),
Welcome Home (to turn on a series of Lights or adjust the temperature).
The Navigator Task Activation screen can display up to 8 task buttons at one
time. Each task button displays the task number with or without a name.
A scroll bar along the right side as well at the Previous and Next buttons
may be used to move around to additional pages of tasks.
A single press of a task button is all that is required to activate that task. The
button will momentarily light up when touched, however the task buttons
will never be illuminated when viewed. This is due to the fact that a task
does not have a state of On or Off, only momentary.
NOTE: The installer may have tagged a task to “not show” on the Task
Activation screen. In reality the task button will still be shown on the screen,
but will be greyed out to indicate that it cannot be manually activated. These
would typically be used for special internal functions.
To return to the Main Menu press the Menu button. To return completely
back to the Main screen press the red close button on the top right of the
screen.